The DMS Strain Sensor was developed for strain measurement on machine and system components.

A unique characteristic of this sensor is the patented assembly technique, which allows the sensor to be set up by an assembly worker directly at the production line. If replacement is required, the sensor can be changed directly on site. As the calibration data are transferred in case of replacement, the new strain gauge sensor can be used right away without additional recalibration, meaning that the system is ready for operation again in just a short period of time. Only an offset-alignment must be done.

Product Specifications

Interfaces
CAN	2.0B
In-/Outputs
Outputs	4-20mA
Environmental Requirements
Protection Class	IP65

 

Product Information

Data Sheet: DMS Strain Sensor